Tags


Well, the time has come to start posting some of the Junos stuff that I have been working on.  What I have decided to do with this post is post the Hardware Information that I used for the lab.  I will then reference this post in the posts to come so that anyone can see what was used.  Below is a picture of the lab topology:

The hardware specs and base IP addresses are as follows:

R4 Cisco 831 router running IOS 12.4(25d)
4.4.4.4/32
Ethernet 0 connected to J1 – fe-0/0/7
192.168.14.4/24
J1 Juniper SRX210 running Junos 12.1R2.9
1.1.1.1/32
fe-0/0/7 connected to R4 E0
192.168.14.1/24ge-0/0/0 connected to J2 ge-0/0/0
192.168.12.1/24fe-0/0/2 connected to J3 fe-0/0/2
192.168.13.1/24
J2 Juniper SRX210 running Junos 12.1R2.9
2.2.2.2/32
ge-0/0/0 connected to J1 ge-0/0/0
192.168.12.2/24ge-0/0/1 connected to J3 fe-0/0/1
192.168.23.2/24
J3 Juniper SRX100 running Junos 12.12R2.9 — 3.3.3.3/32
fe-0/0/1 connected to J2 ge-0/0/1
192.168.23.3/24fe-0/0/2 connected to J1 fe-0/0/2
192.168.13.3/24