Ok, time for our next Junos topic – RIP Authentication and Preferences. Below is our lab topology. Let’s do RIP Authentication first. First, up – md5 authentication between R4 and J1 only. For this exercise, we will use the password of JNPRCSCO for the link authentication between the routers. First up, R4. Enter…
Here is a quick reminder on what the lab looks like: Ok, time to get some routing. First up, Routing Information Protocol, RIP! So, first up we will configure the Cisco router, R4 for RIP. R4(config)#router rip R4(config-router)#ver 2 R4(config-router)#net 192.168.14.0 R4(config-router)#net 4.0.0.0 R4(config-router)#no auto-summary Now onto the Juniper configuration. J1 is…
The other day I posted some “basic” MPLS information and figured I could use that to build a bit more. In subsequent posts I will post the configs for EIGRP, OSPF, and BGP – but today I will post on RIP. So, this whole lab/post will build off the previous one – LINK – but…