Ok, time for some eBGP between Cisco and Juniper Before we begin this lab, reset all the configs back to the rescue/base before beginning. Ok, let’s configure our J1-J2-J3 OSPF Configuration. J1: jfry@J1> edit Entering configuration mode [edit] jfry@J1# edit protocols ospf area 0 [edit protocols ospf area 0.0.0.0] jfry@J1# set…
Time for some eBGP between Juniper devices Ok, time for some eBGP configurations. Of course, first thing we need to do – reset to the rescue/base configs. You can do that now. We will create an iBGP session between J1 and R4 using ASN 14 and we will also create an iBGP session between…
Now time for some iBGP with Cisco and Juniper Ok, again we need to reset the lab to the rescue config on J1, J2 and J3, and load the base on R4. Now that you have done that, we can configure OSPF area 0 on J1, J2, and J3. We will advertise the loopbacks…