Ok, now we can reset back to some basic stuff –  NHRP or VRRP! Before beginning, reset all configs back to rescue/base.   Junos only supports the standard NHRP, VRRP.  For this lab we will configure a VRRP address of 192.168.23.23 on the link between J2 and J3.  We will then PING that address…

Ok, time for some eBGP between Cisco and Juniper Before we begin this lab, reset all the configs back to the rescue/base before beginning.   Ok, let’s configure our J1-J2-J3 OSPF Configuration.   J1: jfry@J1> edit    Entering configuration mode   [edit] jfry@J1# edit protocols ospf area 0    [edit protocols ospf area 0.0.0.0] jfry@J1# set…

Time for some eBGP between Juniper devices Ok, time for some eBGP configurations.  Of course, first thing we need to do – reset to the rescue/base configs.  You can do that now.   We will create an iBGP session between J1 and R4 using ASN 14 and we will also create an iBGP session between…