Ok I finally tried it – swapping in a T-Mobile SIM into an Apple iPad Air that was running a AT&T SIM for cellular data – and you know what, it works! It was as easy as ording a Bring your own tablet T-Mobile Nano SIM at – http://prepaid-phones.t-mobile.com/sim-card?cm_sp=tmo_landingpage-_-yorktown-_-prepaidSIM I got the card in a…
Now time for some iBGP with Cisco and Juniper Ok, again we need to reset the lab to the rescue config on J1, J2 and J3, and load the base on R4. Now that you have done that, we can configure OSPF area 0 on J1, J2, and J3. We will advertise the loopbacks…
I have been using the Cisco CSR1000V for my home lab setup for a little bit now. There have been some questions on how to set this up for a home lab and I figured I would cover how I am using it. For this post, here is what we are going to build – …