Time for some multi-protocol labs! Ok, we have done RIP and we have done OSPF.  Now time to put them together!   For this lab the Juniper devices will be in OSPF Area 0 and the Cisco device will be in RIP.  J1 will sit in both RIP and OSPF and handle the redistribution between…

  Time for the next Junos post! Here is our lab image for this post. Ok, first thing we need to do is rollback to our rescue config so we start on a clean slate: R4: R4#configure replace flash:base.txt   J1: [edit] jfry@J1# rollback rescue load complete [edit] jfry@J1# commit and-quit commit complete Exiting configuration…

  Here is our diagram for this lab For this lab we will configure authentication for Area 0   First up some quick housecleaning J1: [edit] jfry@J1# delete protocols ospf area 0 interface fe-0/0/7 authentication    [edit] jfry@J1# commit and-quit commit complete Exiting configuration mode   jfry@J1>   and R4 R4(config)#int e0 R4(config-if)#no ip ospf authentication   …